MASS/BLEND^®

Blending Systems

• Each liquid stream is individually dosed to a common location at a net flow rate greater than the maximum take-away rate.
• A dose is "on-off" or digital. It is produced by a servo--PD pump--mass meter "module".
• Each stream is dosed to a correct mass proportion.
• Each stream starts and stops simultaneously.
• The system can be started or stopped at each dose interval -- typically every 5 seconds.
• The system is inherently accurate, stable, self monitoring, self correcting.
• The system automatically adapts to changes in take away flow rates without re-calibration or stream flow adjustment.

• PC/PLC Controls
• Mass Meter Based
• No PID Loops
• No Start/Stop Problems or Penalties
• Exceptionally Low System Volume
• Up to 0.15 to 0.25% Accuracy Dependent upon Dose Size and Type of Product
• No Filler Starvation or Startup Problems
• Pre-Engineered Dosing "Modules"
• 0 to 250 GPM Continuous Stream Capability
• "Cycle by Cycle" Tuning and Monitor
• Operate with All Types of Liquids - Low Viscosity to High
• No Forced Changes in Present Batch Formula Streams
• All Blended Product Can Be Utilized
• Proven Technology Components

• Reduced consumption of plant floor space
• Real time batching -- no aging effects
• Faster changeover
• Maximum flexibility for "future FOG"
• Greater product consistency and reproduceability
• Inherent 100:1 scaleability of the batch process
• Make only what you need -- no waste
• Shorter runs become practical
• Tighter bundle to consumer demand
• Inherent and fast CIP
• Reduced component waste
• Reduced effluent volumes

Want to know more?
Call for a technical "White Paper" which explores these technical methods in depth.
Download the brochure in PDF format